Your Vorons, your RatRigs, your one-off custom builds — all on the same screen as your Bambu and Prusa machines. Live status, a queue that routes itself, and orders that flow straight to the floor. No plugin to flash, no Mainsail tab per printer.
Supported models
Any printer running Klipper with Moonraker connects through the AutoPrintFarm hub over your local network, so your custom builds live in the same fleet view as everything else.
How the hub connects
What you get
A hand-built Voron shows up next to a P1S in the same fleet view — same live status, same queue, same alerts. No more managing the DIY machines in a separate browser tab while the rest of the shop runs somewhere else.
Temps, current job, progress, and print state for every Klipper machine on one screen — catch a failed print in under a minute, not the next morning when the spaghetti has cooled.
Route a sliced job to whichever printer is free, Klipper or not. The queue doesn’t care that your Voron is homemade — it just knows it’s open and sends the work.
Getting started
No slicer plugins, no SD cards, no port forwarding — just the hub on your local network.
Connect the AutoPrintFarm hub to your Wi-Fi. It finds printers running Moonraker on your local network — the same machines Mainsail or Fluidd already see.
Confirm each printer and its Moonraker address so the hub can read status and dispatch jobs over your own network. No firmware to reflash, no plugin to install.
Every Klipper machine appears with live status alongside the rest of your fleet. Route jobs from the queue, monitor each print, and get a push alert the moment one fails.
Klipper FAQ
Don’t see yours? Email nate@autoprintfarm.com — a real person reads every message.
Any printer running Klipper with Moonraker — Voron 2.4 and Trident, Voron 0, RatRig V-Core and V-Minion, and the custom builds nobody else accounts for. If Mainsail or Fluidd can see it, AutoPrintFarm can run it.
No. AutoPrintFarm talks to your printers through Moonraker’s API over your local network. There’s no Klipper config to edit, no plugin to flash, and no port forwarding to set up — the hub does the connecting.
Yes — that’s the point. A Voron, a P1S, and an MK4 sit in the same fleet view, share one queue, and feed off the same Etsy and Shopify orders. The queue routes work to whatever’s free, regardless of brand.
It keeps printing. The job runs on the printer itself, so a dropped connection won’t pause or ruin it. When the hub reconnects, live status and the queue catch right back up.
Ready when your farm is
One place for your printers, your orders, and your team — and it keeps running long after you’ve closed the laptop.
Free for one printer · no credit card · 5-minute setup
